The FLIway 40 charging pad can charge several devices
(smartphones, tablets, smart watches, portable speakers, etc.) at the
same time including up to 8 smartphones. However, certain devices
or combination of devices may require more power than is available.
When this happens, the indicator light will blink red 3 times. Remove
the devices, one at a time, until the blinking stops.
If the indicator light blinks red 1 time, this means that a fault is detected.
Remove any foreign object or device to remedy the problem.
Please ensure that dirt or other contaminants are not on the FLIway
40 charging pad.
Charging will not occur if proper contact between the FLI Charge-
enabled device and the FLIway 40 charging pad is not made.
2
smartphone case, FLIcube module or FLIcoin module make
firm contact with and lay flat on the FLIway 40 charging pad.
Charging will not occur if proper contact is not made between
the constellation and the FLIway 40 charging pad.
The blue indicator light will light up to show you that your device
is receiving power. If a fault is detected, the FLIway 40 charging
pad will shut off and the indicator light will blink red and then
stop illuminating. Once the fault is removed, the FLIway 40
charging pad will turn back on.
When not in use, the FLIway 40 charging pad will be in Sleep
Mode. In this mode, the FLIway 40 charging pad and the
indicator light turn off.
You may simultaneously power and charge several FLI Charge-
enabled devices on the FLIway 40 charging pad.
Make sure to place only FLI Charge-enabled devices on the
FLIway 40 charging pad.
Devices that are not FLI Charge-enabled devices may not
receive power.
•
•
•
•
•
•
•
•
•
3. Maintenance and Usage
