FW1170 User’s Manual
M4046-01
9
Seyeon Tech Co., Ltd
2. Hardware Description
2.1. Front View
Picture 2 : Front View
Name
Description
A
MIC
MIC for audio communication
B
Power LED (Red/Green)
RED LED - POWER(turned on with power)
GREEN LED – STATUS (turned on in case of IP setup completed, setup for uPnP.
Refer to uPnP Manual)
UPNP Setup
1) blinks every sec(of f & on in 1 sec)--> communicatable with gate with IP set
up
2) blinks every 1/4 sec (off & on in 1/4 sec) --> Internet is available (DNS setup
needed)
3) blinks every 1/16 sec (off & on in 1/16 sec) --> Port mapping completed
(access from the outside is available)
4) continuous On --> test of access from IPCCTVDNS server to FW is
completed
(IPCCTVDNS server setup completed, access test is available only when IP is
enable.)
(If IPCCTVDNS setup is Disable, LED is continuously On )
C
LAN(Tx/Rx) LED
RED LED – LAN TX/RX(turned off when transmitting data)
GREEN LED – LAN LINK(when LAN cables are linked)
D
Lens
Lens for board mount
E
Lens Guide
Helps to focus easily
F
SPK Jack
Audio Input Port (2.6pi)
Table 3 : FW1170 Front View
A
F
E
B
D
C
