15
14
PRECAUTIONS
The below precautions should be carefully followed for the effective function
of the product and safety of users.
Do not expose the product to severe impacts.
(This could occur damage)
Do not try to disassemble, repair,
renovate the product without expert assistance.
(Contact the service for parts needing repair)
Do not leave the product in damp
or wet places as there is danger
when the product is exposed to water
or metal. (Danger of electrocution)
Other Precautions
In cleaning the product, make sure power is turned off, wipe with,
a soft and clean cloth then with water. Never use benzene,
alcohol or other cleaners. (Contact the service center or a store near
you for static controllers and cleaners. The LCD polarizing plate may
peel off or the product may decolorize, dissolve, or crack.
TROUBLE SHOOTING
When failure or problems occur, refer to the following. For further assistance,
contact our customer support centers.
"The power does not
turn on."
Check whether the plug is in place and try to
reconnect it.
"Check signal cable"
sign appears
Check if the signal cable is properly connected
to the computer or video card and try to reconnect
it.
appears on the screen.
Set the resolution and frequency compatible to
the monitor.
"Distorted Video"
Check if the resolution and frequency of the
computer or the video card is set to accommodate
the monitor and then reset the screen according
to the present mode of the monitor menu and
the standard signal timing chart.
The screen is too
bright
Try to control the brightness or contrast of the
screen.
The color of the
screen appears as if
there is a shadow.
Go to the OSD color control menu, the user mode
and control the door.
There is no sound
Check the connecting cable.
The volume is too low
Control with the up and down buttons
Check if the antenna is connected and control
and control the mode with the TV.
The TV won t turn on
"Out of range"
