Equipment Risk Assessment
– Uncontrolled document once printed | Page 6 of 10
HAZARDS DESCRIPTION
IMPACT DESCRIPTION
LIKELIHOOD
CONSEQUENCE
RISK
RATING
RISK CONTROL MEASURES TO ELIMINATE / REDUCE RISKS
Operator slipping or tripping
during equipment operation.
Loss of control of equipment,
personal injury, damage to
equipment
C
3.2
•
Always operate the equipment with two hands on the handlebar for maximum
control.
•
Assess work area prior to operating equipment, do not operate up or down a
slope greater than 25 degrees.
•
NEVER allow people to ride inside bucket / tub.
•
Maintain a safe operating distance from trenches, excavations and pits.
•
Always look over your shoulder and check behind you for hazards prior to
operating in reverse.
MAINTENANCE AND REFUELLING
Refuelling engine
(B450G Model only)
Fire or explosion
Chemical burns (fuels and oils)
C
3.2
•
Smoking or use of mobile phone is not permitted while refuelling.
•
When refuelling ensure nozzle is in contact with the machinery (grounded).
•
Switch off engine before refuelling.
•
Keep fuel away from sources of ignition.
•
Always use fuel container nozzle to reduce risk of spilling fuel.
•
Clean up any fuel spills immediately.
•
Always carry first aid facilities.
•
Refuel on an impermeable surface away from drains / water courses in a well-
ventilated area.
•
Re-cap fuel container after use and store in appropriate area.
•
Always wear PPE when refuelling engine (gloves and glasses) to reduce risk of
fuel meeting hands and eyes.
•
Replace damaged or missing warning decals.
Recharging Battery
(B450E Model only)
Electrocution
E
4.2
•
Only charge the unit using the factory fitted charging unit.
•
Inspect ALL cables for exposed wires for cuts and damage prior to charging
– If
damaged cables are identified isolate equipment and have repaired immediately
by a licenced electrician.
