EHHNK5 RIDE-ON TROWEL • OPERATION MANUAL — REV. #3 (05/03/21) — PAGE 37
Pitch Adjustment Levers (Monthly)
Perform the following lubrication procedure
once a month
.
1. Locate the Zerk grease fitting next to the knob on either
pitch adjustment lever (Figure 28). Remove the Zerk
grease fitting cap and set it aside.
Figure 28. Pitch Adjustment Lever Lubrication
2. Wipe the Zerk grease fitting clean to prevent abrasive
material from entering the fitting during lubrication.
3. Lubricate the Zerk grease fitting with one shot of
multipurpose grade grease. Replace the Zerk grease
fitting cap when finished.
4. Repeat steps 1–3 for the grease fitting on the remaining
pitch adjustment lever.
PITCH
ADJUSTMENT
LEVER
ZERK
FITTING CAP
ZERK GREASE
FITTING
Pitch Tower (Every 6 Months)
Perform the following lubrication procedure
once every
6 months
.
1. Locate the Zerk grease fitting just below the pitch
adjustment lever on either pitch tower (Figure 29).
Remove the Zerk grease fitting cap and set it aside.
Figure 29. Pitch Tower Lubrication
2. Wipe the Zerk grease fitting clean to prevent abrasive
material from entering the fitting during lubrication.
3. Lubricate the Zerk grease fitting with one shot of
multipurpose grade grease. Replace the Zerk grease
fitting cap when finished.
4. Repeat steps 1–3 for the grease fitting on the remaining
pitch tower.
PITCH
ADJUSTMENT
LEVER
ZERK GREASE
FITTING
ZERK
FITTING CAP
MAINTENANCE (TROWEL)
