Flexsteel home Battery Pack 3 Instruction Manual Download Page 3

 

 

The battery pack may be charged only at an ambient temperature ranging from 0°C 
(32°F) to 40°C (104°F). 

 

 

Do not cover the battery pack while charging. 

2. Features 

 

The battery pack consists of 25.2V/2.6Ah lithium ion rechargeable batteries. 

 

The battery pack can provide up to 300 complete cycles (from upright to reclined and 
back to upright) with load of 80kg (175 lbs.) on one charge. The quantity of cycles will 
decrease or increase depending on load size. Some furniture features optional USB 
ports. Using the USB ports will consume power from the battery pack and will decrease 
the quantity of cycles for that charge. 

 

Works during a power outage 

 

The battery pack may be used to operate the furniture while simultaneously being 
charged. 

 

The battery pack should not be used on lift reclining furniture. It is also not 
recommended on 601M or 604P styles with cup holder controls, 59H styles with touch 
controls, styles with Bluetooth features, or styles containing USB ports with no USB 
cutoff or zero-draw features (see Flexsteel Control Type Document included with 
furniture) as these features will drain the battery and greatly decrease the number of 
cycles. 
 

    

Warning Signs of Low Battery

 

Red LED - A SOLID red LED indicates the battery pack is being charged. 

Green LED - A SOLID green LED means the battery pack is fully charged (after eight 

hours). The green light goes out when the battery pack is plugged into the 
furniture or is in standby mode. 

Audible Beeping - The beeping signal warns the user that the charge is VERY LOW and 

the battery pack must be charged. 

 

 

Summary of Contents for Battery Pack 3










Reviews: