Page 14
© 2015 FlexRadio Systems, v1.0.2
Locate the long 5.2” (13.21 cm) RG-316 MCX cable assembly. Carefully insert one end of the mini RG-316
Coax cable assembly into the gold MCX “snap on” connector labeled
X1
located on the ATU PC board by
pressing down gently until it is completely seated. The
X1
MCX connector is located on the edge of the
ATU board facing the front of the FLEX-6300, below the black 12-pin connector as shown below.
On the Filter PC board, locate the gold MCX connector labeled
ATU-IN
adjacent to the ATU-OUT
connector. Connect the unconnected end of the long RG-316 MCX cable assembly to the
ATU-IN
MCX
connector by carefully inserting it into the gold MCX “snap on” connector and pressing down gently until
it is completely seated as shown in the image below. Be careful not to disturb the ATU or Filter inductor
coils when installing the long RG-316 MCX cable assembly.
