1-64ch Video Audio Data Optical
Transmitter Receiver user manual
Page 13
FlexOptic
http://www.flexopticnetworks.com
Optical port Connection: Use standard FC fiber cable to
connect the FBVAD1000 device.
6.1.4. Transmitting Distance
Check the real application distance meet the requirement
of the FBVAD1000 device.
6.2. Installation Steps
1) Fasten the device;
2) Connect video sources, such as video cameras, to
transmitter using coaxial cables. Connect monitoring
equipment to the corresponding video channel of
receiver;
3) Connect audio channel as requirement;
4) Connect data channel as requirement;
5) Connect the fiber link to the FC connector.
6) Power up the machine.
7) The PWR LED will display red and Status LED will
display green showing system is ready. When
transmitting, video LED of transmitter and receiver is
green.
6.3. Maintenance
6.3.1. Problem: PWR led isn’t ON
Reason: Power supply is not OK.
Solution: Check the power supply connections
6.3.2. Problem: Video transmitter ‘s video LED isn’t ON
Reason: No video source detected
