Quick Start Guide
MTX-4G-JAVA-IoT (AUS) as SMS Alarm
MTX Modems, Routers and Gateways
Distributed by: Australis M2M Pty Ltd
ABN: 43 626 409 489
Page 6 of 14
mtx 4g java iot aus sms alarm quick start guide 202102rv01
Antenna Connection(s)
The MTX-4G-JAVA-IoT (AUS) units have 2 antenna connectors, a primary and a secondary. The
primary antenna should always be connected, and we recommend connection of a secondary
antenna. Connection of a suitable secondary antenna will usually improve signal strength and quality.
For more information on antenna installation and checking refer Application Note:
Antenna Installation Understanding 4G/3G Signal Data.
Installation
1. Mount unit, connect IO and/or modbus devices as required
2. Mount and connect suitable antenna(s)
3. Fit SIM card enabled for the services intended, SMS
4. Connect serial cable or suitable USB to serial adaptor to your PC
5. Install a copy of the MTX Configuration Tool
6. Launch configuration tool
7. Select the COM Port connected to COM1 of the modem
8. Power on the unit than proceed to make configuration settings, ensuring the unit is reset once
desired settings are made
