3 Installation
3.1 Preparation
Do not place the device in a metal casing.
1 Position the pressure switch and wireless input
module within a metre of the cooker hood
exhaust duct. Fix the unit to the wall with the
accompanying screws.
2 Connect the wires from the kitchen fan to the
connections marked “Filter”. It is immaterial
which wire is connected to which connection.
15 14
3.2 Commissioning
A: Input module, wireless
A
B: Status LED
C: Touch button
B
C
3UHUHTXLVLWH$GDSWHU&ΔPXVWEHLQVWDOOHGDQGFRQȴJXUHG
2 Turn on the power to the device, the status LED will light for 3 seconds.
:DLWXQWLOWKHVWDWXVLQGLFDWRUVKRZVWKHFRQQHFWLRQPRGHVWDWXV/('&ȵDVKHV
alternating green / red. If the device shows another indication, , follow the instructions
under 3.2.1.
4 Launch the Flexit GO app on your mobile device and connect to the product.
5 When the home screen appears, go to More
/
Additional functions
/
Wireless
accessories.
6 Press
Chosen device
under the heading
Add wireless device
. Then choose
CI79/
CI81 Cooker hood
.
7 When the
Pairing process status
has switched to
Start pairing procedure
(see
LPDJHSUHVVbEXWWRQ&ΔIVWDWXVOLJKW%ȵDVKHVJUHHQHYHU\WKLQJLV2.ΔIQRWSUHVV
button C again. The device is now connected with the product which is shown in the
list
Connected devices
after a few seconds.
3.2.1 If the CI79/CI81 has been connected before
1 Launch the Flexit GO app on your mobile device and connect to the product.
2 When the home screen appears, go to More
/
Additional functions
/
Wireless
accessories.
3 Press
Chosen device
under the heading
Add wireless device
.
Then choose
CI79/CI81 cooker hood
.
4 When the
Pairing process status
has switched to
Start pairing procedure
(see
LPDJH3UHVVDQGKROGEXWWRQ&XQWLOWKHVWDWXV/('%LVȵDVKLQJZKLWHDQGWKHQ
UHOHDVHEXWWRQ&:KHQWKHVWDWXV/('%LVȵDVKLQJDOWHUQDWLQJJUHHQUHGSUHVV
EXWWRQ&ΔIWKHVWDWXV/('%LVȵDVKLQJJUHHQHYHU\WLQJLV2.LIQRWSUHVVEXWWRQ&
again.
The device is now connected with the product which is shown in the list
Connected
devices
after a few seconds.
4 Description
4.1 Intended use
The device is designed to change the ventilation mode during use of a cooker hood.
4.2 Working principle
The device communicates with the ventilation unit using wireless communication.
4.2.1 Ventilation speed and mode
During use of a cooker hood the ventilation system is set to
COOKER
HOOD
mode.
•
COOKER
HOOD
mode:
Intended for use together with a cooker hood.
4.2.2 Adjustment of COOKER HOOD mode
The desired fan speeds to be used in
COOKER
HOOD
mode can be set in the Flexit
GO App.
4.3 Visuaaliset signaalit
Käynnistys
Tilan merkkivalo
Virta
Oranssi Jatkuva
Tila
Tila OK
Vihreä
Jatkuva
Kommunikaatiovirhe
Punainen 1 välähdys
COOKER HOOD-tila
2 välähdystä
Kokoonpano
Liitos
Punainen/vihreä
5 Käyttö
Kun liesikupu on toiminnassa, ilmanvaihtolaite siirtyy automaattisesti liesikupu-tilaan.
Kun liesikupu sammutetaan, ilmanvaihtolaite palaa edelliseen tilaan.
6 Tekniset tiedot
6.1 Ympäristöolot
Käyttölämpötila-alue:
Ȃbr&
Lämpötila-alue kuljetuksen ja säilytyksen aikana:
ȂbȐbbr&
Suhteellinen kosteus:
ȂbWLLYLVW\P¦W¸Q
.RWHORLQWLOXRNNDΔ(&
IP30
6.2 Sähkötekniset tiedot
Verkkovirtalähde:
Ȃb9b$&b+]
Enimmäisvirrankulutus:
b9b$
6.3 Langatonta yhteyttä koskevat tiedot
Tietoliikennetaajuus:
b0+]
Lähtöteho:
9¦KLQW¦¦QbG%P
Laitetta ei saa käyttää
Euroopan
ulkopuolella.
6.4 Paineensäätöalue
Säätöalue:
20–300 Pa
Tuotteitamme kehitetään jatkuvasti. Sen vuoksi pidätämme oikeuden muutoksiin.
Emme myöskään vastaa mistään mahdollisista painovirheistä.
1 About this manual
1.1 About the device
The CI81 is a transmitter, which communicates with the ventilation system through the
wireless adaptor. The alternative ventilation setting is initiated when the chimney fan is
started, and transferred via wireless communication to the air handling unit.
1.2 Admonition
!
ȋ:DUQLQJȋLGHQWLȴHVDKD]DUGWKDWFRXOG
lead to personal injury, including death.
”Note” is used to highlight
additional information.
2 Safety
2.1 Directives
The device meets the following EC directives:
• EMC directive: 2004/108/EC
• Low voltage directive: 2006/95/EC
• RTTE directive: 1999/5/EC
• RoHS directive: 2002/95/EC
• WEEE directive: 2002/96/EC
2.2 Signs on the unit
!
Caution. Check the instructions for use for important cautionary.
Danger: risk of electric shock.
CE marking of conformity
Use of the device may not be legal in every member state.
'LVSRVHDFFRUGLQJWR(XURSHDQ&RPPXQLW\'LUHFWLYH(&:(((
2.3 General safety instructions
- This product was designed and manufactured to ensure maximum safety during
installation, operation and service.
- Parts of the device carry mains power, which is a potential lethal voltage.
- Disconnect power at supply line, circuit breaker or fuse before installing, servicing or
removing the device.
- The device is designed for indoor use only.
- Do not expose the device to rain or moisture, to avoid short circuit.
- Operate the device between 0°C and 40°C.
- For cleaning of the device use a soft damp cloth only. Never use any abrasive or
chemical cleaner.
- Do not paint the device.
