Flexit 115996, Manual

Page: 14 / 44

14
R O O M I E W I F I
3. Stick the supplied cardboard template on the
inner wall using a sticker.
A big opening must be coaxial with the air duct.
Use a builder’s level for horizontal alignment of the
mounting template.
Mark the openings for dowels from the fastening kit
DQGGULOOKROHVWRDUHTXLUHGGHSWK
Route the power cable from the ventilation unit
outside through the marked opening on the mounting
template.
4. Press the side tabs to detach the front part of
the indoor unit from its back part.
Prior to mounting the
front panel make sure that
the thermal actuator rod
is in the lowest position
and the light indicator is at
OHDVWWZRPLQXWHVR΍
207
Ø 5
4 holes
Ø 180
87,5
50,4
138
103,5
137
42,5
105,5
85
Ø 23
Hole marking for fasteners of the unit, mm
!