68kg
per shelf
Package Includes:
25x75mm
Fixings Package B
Hammer
Ladder
Eye Protection
Wood Drill Bit
Shifter Or Socket Wrench
Stud Finder
Tape Measure
Pencil
Power Drill
Masonry Drill Bit
Tools Required for Assembly:
Install Shelf Brackets into Solid Concrete or Masonry Walls
1. Determine the desired height, use template to level and then
transfer the template hole guides onto wall.
2. Drill 60mm deep holes with a 10mm masonry drill bit.
3. Hammer in the expansion anchors (B2) firstly and then install the
shelf brackets with washers (B3) and coach screws (B1) with shifter
or socket wrench.
Solid Concrete or Masonry Wall
Install Shelf Brackets into Timber Wall Studs
60mm
5mm
1.Determine the desired height, use a stud finder to ascertain stud centres
( installation template provided suits the two common stud centres being 450mm
& 600mm. If for the unusual reason that stud centres are different to template
centres, ensure all support brackets provided are installed onto timber wall studs )
2.Drill 60mm deep holes once template has been levelled and into position, using
a 5mm wood drill bit and the holes provided on template.
3.Install the shelf brackets with washers ( B3 ) and Coach Screws ( B1 ) with a shifter or socket wrench.
4.Do not install under any circumstances onto metal stud wall frames.
450mm
600mm
B3 B1
fixed onto the
Timber Wall Stud
450mm
600mm
