FlexiForce CE-FLH, User Manual

Page: 4 / 23

manual
FF-MANUAL CE-LHR /3 WWW.FLEXIFORCE.COM
GB
GUARANTEE, CONDITIONS AND TERMS
The general terms and conditions of delivery and payment issued by the Metaalunie and designated as
METAALUNIE CONDITIONS are fully applicable to all our quotations, contracts and their implementation.
We expressly reject all other terms and conditions. On request we will send you a copy of these terms and
conditions free of charge. A copy may also be downloaded from our website www.flexiforce.nl .
Flexi-Force strives to deliver 100 % in conformance with the order. In practice, in spite of all our controls, this is
not always possible. However we will rectify any errors as quickly as possible, in order to minimise the
inconvenience caused to you or the user. As such, it is important that you inform us as soon as possible about
any problem with the delivery (include the order number and week of production) and give us the opportunity to
offer a suitable solution.
Flexi-Force will only reimburse third party costs if we have given explicit permission for this in advance. The
reimbursement is based on normal rates and travelling expenses over distances of 1 hour away at most.
For large-scale projects we strongly advise you to first install 1 door completely before installing the other doors.
In this way, any errors can be detected early on and rectified comparatively cheaply.
This manual does not confer any rights. Technical modifications may be made without written notice.
Flexi-Force has endeavoured to design and put together this hardware set in conformance with the applicable
CE-norms. However, we recommend to check our configuration against any local national specification.
Flexi-Force B.V., P.O. Box 37, 3770 AA Barneveld, The Netherlands
Tel. +31-(0)342-427777, ff@flexiforce.nl
APPLICABLE CE DIRECTIVES AND RESTRICTIONS:
Industrial overhead doors brought into the European market must follow the EMC-Directive*, Low Voltage
Directive*, Machine Directive* and Construction Products Directive, issued by CEN.
(* = only power-operated doors)
Flexi-Force has developed and constructed this hardware set according to these directives. This gives a
restriction to the max. forces and dimensions of industrial doors:
•
Max width : 5 meter
• Max height : 5 meter
• Max door weight : 300 kg
•
Standard equipped with anti-drop protection: Cable break device a nd spring breaking
device
•
Other safety accessories: roller protection, bottom safety edge system (whe n power
operated), slack cable device, cable inside track system.
•
Tested for CE when selecting the proper Flexi-Force components, and c ombining with
tested panels and operator/control unit combinations.
•
Use of finger safe sections for door heights <2,75m.
• Cables outside the track system are not allowed, unless the cables are covered.
Flexi-Force has applied the mandated INITIAL TYPE TESTING for doors described in this manual, at
the SP-Institute in Sweden (as Notified Body Nr. 0402). The INITIAL TYPE TESTING REPORT that
has been rewarded, can be transferred to the door producing company when truly declared
conformity is done. This is needed to complete your CE technical construction file according to
product standard EN13241-1. The ITTR-number should be placed on the CE-plate on the door.
The article codes of the parts are given in (parentheses). This door can only be installed according to the
CE-certificate if all parts are according to the parts lists of the SP-certificate. See
www.flexiforce.com
.
This manual should be completed with additional installation manuals for IND Hardware sets, cable break
devices, spring break devices and E-operator.