116
PF7/PF7+ Peristaltic Filler with QC14 Pumphead User Manual
25.19 Network
Configure the Ethernet network connection to transfer data to NetTools.
To transfer pump data via the Ethernet connection refer to "WMFTG NetTools —
Network and user account setup " on page 124.
25.19.1 DHCP
On—IP address is automatically assigned when connected to a network.
Off—manually configure the network settings.
Manual configuration:
Network settings may be specific to your organisation.
Contact your systems administrator to ask if you can use the
example settings or to obtain correct configuration details for
IP Address, Subnet Mask and Default Gateway.
The IP address must be unique for each device.
25.20 Backup and reset
i
Administrator only. Refer to "User profile types" on
page 110.
25.20.1 Delete all reports
All reports are deleted.
25.20.2 Delete all recipes
All recipes are deleted.
25.20.3 Import all data
Any combination of the following files can be imported from a USB flash drive;
•
Recipes.pf7
•
Settings.pf7
•
Users.pf7
Option only displayed when a USB flash drive is detected.
Table 25 - Required equipment - Import all data
USB flash drive with PF7+ files. (Refer to "Export all data" on page 119)