INSTALL THE FOOTBAR
Important Safety Tip: Always make sure the footbar is locked into place with both
plunger levers before use.
1. Flip your levers so they point up. They should lock into place. It doesn't matter which
direction you turn them, as long as they're facing up.
2. Place your footbar into the corners, and slide it all the way down.
3. Flip the knobs in either direction to unlock them and they will spring into place.
4. Wiggle the footbar up and down to ensure it is locked into place.
5. If you would like to raise the foot bar to the highest position, flip the levers up.
a. Lift your footbar up but not so much that you can see the holes on the inside.
b. Unflip your levers in either direction, and then continue pulling up until it locks into
place. And then, you're all set.
INSTALL SHOULDER RESTS
1. The shoulder rests simply drop into place on either side of the headrest.
Note: Remember you've got a few options for the shoulder rest positions to Find Your Fit.
You can view videos on all of the shoulder adjustments in the Online Studio.
6
2. Next, add the blue springs. The two blues go on either side of your black spring.
3. The orange spring goes on the outside. It doesn't matter which side, just one the outside.
4. Finally the white spring goes on the other outside position.
5. Hook up the colored spring ends to their corresponding hook on the spring bar.
6. Ensure the gear bar is in the home (first gear) position. If not, lift up on the gear bar, slide it
toward the foot-end, and it will drop in place.
Note: The springs can be either attached or unattached when moving the springbar. For ease
of adjustment, be sure to grab the center of the springbar.
