Assembling the Flexia™ Reformer
Foot End
Head End
Foot Strap Anchor
Long Rail
Springbar
Welcome to the Flexia™ Community! Thank you for your purchase. Easy to follow videos on
Assembly, Introduction & Safety, and how to properly store your Flexia™ Reformer can be
found at http://Assembly.FlexiaPilates.com.
TOOLS NEEDED
Your Flexia™ Reformer comes with three wrenches and all of the bolts necessary to assemble:
5/32” Allen wrench
9/16” Open Ended Wrench
7/16” Open Ended Wrench
Bag of bolts, nuts, and washers
Note: If you have a ratchet and socket at home, these can be helpful. Pictured in the
assembly video is a 9/16” socket with an extender arm, and a smaller 7/16” socket.
PREPARE YOUR REFORMER FOR ASSEMBLY
Arrange your reformer in a rectangle on the floor. Consider padding the floor with a blanket
or carpet to protect your floor and your Flexia™ Reformer from damage. You will be
assembling your Flexia™ Reformer frame upside down. Upside down assembly is the easiest
way for one person. It will be easy, we promise.
1
