I
2
3
4
5
6
7
8
MI
M2
9
*
I0
INTRODUCTION
The Multi-Zone remote control and receiver combo for RGB strip lights uses the most advanced RF wireless transmission technology.
The system consists of two parts: the handheld remote control and the in-line receiver.
The remote control can be synced with multiple receivers in up to 10 separate zones, and these zones can be controlled either separately or all at
once. Featuring 18 built-in changing modes, the remote control allows you to pause on one color, cycle through a variety of colors, create and
memorize themes, and/or alter the light intensity (brightness).
SAFETY AND WARNINGS
REMOTE CONTROL
Install in accordance with the National Electric Code, and local regulations.
This product should be installed and serviced by a qualified electrician.
Do not connect directly to high voltage 120V AC power.
This product is rated for indoor installation and is not protected against moisture.
Proper heat dissipation will prolong the working lifespan of this product. Install in a well ventilated area.
Only install compatible LED drivers and fixtures. Contact Technical Support or visit the product page for compatible accessories.
Ensure applicable wire is installed between driver, fixture, and any controls in between. When choosing wire, factor in voltage drop, amperage
rating, and type (in-wall rated, wet location rated, etc). Inadequate wire installation could overheat wires and cause fire.
Utilize the wiring diagrams in this installation guide for basic setups.
•
•
•
•
•
•
•
•
Details
RGB COLOR CHANGING MULTI-ZONE
LED Remote Control & Receiver
SKU:
Working Voltage:
Working Frequency:
PWM Frequency:
Max. Signal Range:
Working Temp:
Dimensions:
Weight:
Warranty:
RGB-MZ-CTRL
5V (Built-in lithium battery)
2.4GHz
2000Hz
98ft (30m)
-22°F ~ 131°F (-30°C ~ 55°C)
H: 5 3/4” (146mm) W: 2 1/4” (56mm)
D: 7/8” (22mm)*
7oz (200g)
5 years
Sync Status Indicator Light
Mode Adjust
Speed Adjust
Brightness Adjust
Zone Selection Buttons
Touch Adjustable Color Circle
*Comes with a wall mount for easy storage
(18 preset modes)
(Keep pressing to adjust brightness
continuously)
On/Off Button
Pause Button
Memory Buttons
(press for 3 seconds to save the current
settings for future recall
V.2018.11.01
RGB-MZ-COMBO
1
page
support@FlexfireLEDs.com
925-273-9080 opt 2
RGB Multi-Zone Combo
User Guide
