Technical Description and Installation Manual
GigaFlex
8
The following protocols are supported to grant an easy and secure access by a network
administrator:
•
Local Command Line Interface (CLI) access over the Local Craft Terminal (LCT) with
USB or RS232.
•
Remote Command Line Interface (CLI) access over Telnet or SSH.
•
The Graphical User Interface (GUI) over HTTP or HTTPs.
•
Simple Network Management Protocol: SNMPv1, V2c and V3.
3.2
LED Indicator and Connector Pin Assignment on Front Panel
The front panel for models without serial and IO interfaces is shown on Figure 3-2.
Figure 3-2. Front panel for models without serial and IO interfaces.
The models with serial and IO interfaces have a front panel as shown on Figure 3-3.
Figure 3-3. Front panel for models with serial and IO interfaces.
The front panel LED indicator behavior as well as the connector pin assignment are summarized
on the next two tables.
DSL
SD
FD
VDC
Et er et
V V
DSL
SD
FD
VDC
Et er et
RS
V V
IO
Following models:
•
GF-RAIL2N-6Eth-24V,V26
•
GF-RAIL4N-6Eth-24V,V36
•
GF-RAIL4N-6EthP-24V,V46
Following models:
•
GF-RAIL2N-6Eth-2I2O/2SER-24V,V21
•
GF-RAIL2N-6Eth-2I2O/2SER-PoE-24V,V25
•
GF-RAIL4N-6Eth-2I2O/2SER-24V,V31
•
GF-RAIL4N-6Eth-2I2O/2SER-PoE-24V,V35
•
GF-RAIL4N-6EthP-2I2O/2SER-24V,V41
•
GF-RAIL4N-6EthP-2I2O/2SER-PoE-24V,V45
