Flexcom Kommunikációs Kft
Üzembehelyezési és használati útmutató (2021/10/13)
5/25
How to use
After charging, inserting the SIM card and setting up via SMS or a mobile phone or PC application, the
device is placed in the desired location. Once turned on, the GPS receiver and SIM card will
automatically connect to the GPS and GSM networks (if available) and start collecting position data.
To use the features of your device, you need a SIM card, similar to a mobile phone. The device
communicates with the mobile service provider's network via SIM card, SMS or mobile phone or PC
applications.
After inserting the SIM card and charging the battery, you can make the necessary settings by
sending an application or SMS (eg entering the device ID name, frequency of sending GPS position
data, etc.).
When switched on
The device continuously registers position data, which can be queried with SMS commands at a
limited level.
If you have a software subscription, the device sends the position data to the software service
center - their processed results (eg map route display, route event list, real-time tracking) - can
be viewed in the phone or computer application.
The subscription software provided by the distributor for the device greatly expands the range of
features of the device. These extensions are only available in the mobile or PC application.
You will find detailed information on the installation, use, maintenance and decommissioning of the
device in the following sections of the documentation.
Flexcom