Flexcom Communication Ltd
Installation and operating instructions (2021/03/12)
12/24
Steps:
Use a screwdriver to remove the 4 screws and remove the cover.
1.
Insert the SIM card into the slot (make sure it is in the correct position and direction).
2.
Screw the cover back on.
3.
Charging the battery
The device is powered by a built-in battery, which needs to be charged at different intervals
depending on the intensity of use. Your phone's charger is suitable for charging, but you can also use
the USB connection of a computer or energy bank. The appropriate charging cable is included with
the device by the manufacturer. This is connected to the tracking device with a special magnetic
connector, while at the other end you will find a conventional USB connector.
Note that since in this case only the attraction of the magnets holds it together, the connection can
easily separate. During charging, the LED lights up red. When the device is fully charged, the light
Flexcom
