Last
update:
2021/05/06
10:14
en:devices:manufacturers:flexcom:area:bike:fb222:manual:full https://wiki.nyomkovetes.net/doku.php?id=en:devices:manufacturers:flexcom:area:bike:fb222:manual:full
https://wiki.nyomkovetes.net/
Printed on 2022/09/09 09:03
Switching on and off
The device switches on automatically when charged and runs continuously until the battery is
discharged - it cannot be switched off.
After switching on, the device starts searching for GPS satellites immediately. If the appropriate
satellite connections are available, positioning will be based on these data. If not, the device performs
position calculation (LBS) based on the position of the transmission towers of the mobile service
providers.
Normal operation of the device
Separate software is available for setting or adjusting the operating parameters of the device, for
retrieving information or for using more advanced services (eg map route display, waiting and travel
points, diagrams, timetable, etc.). This is provided by the distributor in the form of an application that
can be downloaded on an Android mobile phone as part of a subscription system on a desktop
computer and tablet browser.
To use the software, an active internet connection is required on your device (mobile
phone, computer).
Setting options via the software
When using the desktop or mobile application of Flexcom Kft, the setup operations related to tracing
can be accessed in the following ways.
The settings and commands that can be issued depend on the type of device. See the
rest of this guide for information on options for this device.
When using a desktop application:
