FIG. 17
FIG. 18
INDICATOR LIGHT
#2 EXTENSION CABLE
CONNECTION
#1 POWER CORD
CONNECTION
TO HEAD MOTOR
3-WAY SPLITTER
#3 TO
CONTROL
BOX
#2 TO FOOT
MOTOR
#1 TO
POWER
SUPPLY
C A B L E
Connections
As stated earlier in this manual, all cables are set up and connected
at the factory when your Flexabed is built. However those cables
can become disconnected during the shipping and delivery process.
Also, there may be a point in time during the life of your Flexabed
where you need to replace a component of the motor system. The
purpose of these instructions is to help you properly connect all
cables and connections on your bed to ensure proper operation.
Your bed’s power supply (Fig. 17) is mounted to the head platform sec-
tion underneath the bed. If your bed is not functioning properly, the
first thing you should check are the connections on the power supply.
Check These Connections
14
