Flexa Cabin bed 1478538 Assembly Instructions Manual Download Page 2

1

Safety and Care Advice

Important 

– Please read these instructions fully before starting assembly

     80-10104-20   

d

e

b

 

n

i

b

a

 

 

 

IMPORTANT! KEEP FOR FUTURE REFERENCE 

PLEASE DISPOSE OF PACKAGING MATERIAL. 

PLASTIC BAGS CAN BE DANGEROUS TO YOUNG CHILDREN 

 

                WARNING! Not suitable for children under 4 years. 

WARNING!  Do not place this child’s bed near heat sources, windows and other furniture. 

WARNING!  Do not use this child’s bed if any of the parts are broken, torn or missing. 

WARNING! Once assembled, this bed must not be disassembled. Screws must not be removed once inserted. 

This child’s bed is to be used with a 1900mm x 900mm ma ress.

 

Suitable for children over 4 years to adults.

All assembly 

Į

xings should be checked periodically and re- ghtened where necessary. 

Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not 

be placed too close to other furniture or windows, blind cords, curtain pulls or other strings or cords, and should be 

placed either  ght to any wall or have a gap of 300mm between the wall and the side of the bed. 

Any addi onal or replacement parts should only be obtained from the manufacturer or distributor. 

This product complies to standard BS8509: 2008+A1:2011 

 

CARE AND MAINTENANCE 

To clean use a damp cloth, avoiding the use of strong detergents or abrasives. 

Summary of Contents for Cabin bed 1478538









Reviews: