SAFETY RULES FOR PROFILE SANDER
1. ALWAYS DISCONNECT
the sander cord plug from the power circuit before changing
accessories or abrasives.
2. USE PROPER SAFETY EQUIPMENT.
Wear safety goggles to protect your eyes and wear a
protective mask to minimize breathing in the fine dust created while sanding.
NOTE:
Some
wood contains preservatives which can be toxic, Take extra care to prevent inhalation and skin
contact when working with these materials. Request, and follow, any safety information
available from your material supplier.
3. SANDING OF LEAD-BASED PAINT IS NOT RECOMMENDED.
Lead-based paint should only
be removed by a professional.
TECHNICAL SPECIFICATIONS
Voltage supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230V A-weighted noise levels
Power consumption . . . . . . . . . . . . . . . . . . . . . . 210W
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80.7
Power output . . . . . .
Sound power level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93.7
Frequency . .
50-60 Hz
WEAR EAR PROTECTION!
Strokes per minute (max.).... 6,000 RPM Typical Mean effective Acceleration (Front).. 5.6
Typical Mean effective Acceleration (Back) . ..1.4
Weight w/case and accessories . . . . . . . . . . . . . . . . . . . 1.7 kg
REPLACEMENT PARTS
When servicing use only identical replacement parts.
OPERATING INSTRUCTIONS
FOREWORD
The FLEX Profile Sander provides an “in-line” sanding motion that permits sanding of corners,
profiles, and other areas that are inaccessible to other power sanders. A wide variety of pads,
profile holders, profiles, and abrasives are available to meet the requirements of various
applications (see FLEX Catalog).
PREPARATION FOR SANDING
NOTE:
There is a wide variety of accessory pads, profile holders, and profiles available
to fit the FLEX Profile Sander. Please refer to your FLEX Catalog to determine which of
these items are supplied as standard equipment with each particular Profile Sander
Package. All of these items are available as Accessories, and they may be used with any
FLEX Model PS 206 Profile Sander.
SELECTING A PAD OR PROFILE MOUNTING PLATE
Select the Sanding Pad or Profile Holder that best fits your application:
A.
Diamond Pad for Hook Loop Abrasives:
The pointed tip of this pad is used for sanding into
corners and intricately shaped areas. Precut, Hook Loop Abrasives with dust extraction holes
are used with this pad. The 259.593 Dust Wand (and an external vacuum source), can also be
used with this pad to provide dust collection.
B.
Single Profile Mounting Plate:
This plate is used to mount any one of the profiles, in a
vertical position,
under the Profile Sander, Special PSA Abrasives are available in rolls
that can be cut-to-fit the various profiles.