Flex MXE 1000, Original Operating Instructions, Page: 14 / 188

MXE 1000/MXE 1002/MXE 1200/MXE 1202/MXE 1602
14
Instructions for use
WARNING!
Before performing any work on the mixer,
pull out the mains plug.
CAUTION!
The mains voltage and the voltage
specification on the rating plate must match.
Before initial operation

Unpack the mixer and check that there
are no missing or damaged parts.
Mounting/changing the mixer
paddle
Tool without spindle lock:

Bolt the paddle onto the drive
spindle (1.).

Counterhold the drive spindle with an
open-end spanner AF 19 and tighten the
mixer paddle with an open-end spanner
AF 22 (2.).
Remove in the reverse order.
Tool with spindle lock:

Press the lock and turn the gear selector
switch in anti-clockwise direction to
(1.).

Bolt the paddle onto the drive
spindle (2.).

Tighten the mixer paddle with an open-
end spanner AF 22 (3.).
Remove in the reverse order.
Gear selection
(MXE 1002/1200/1202/1602)
CAUTION!
Only select gear with motor stationary.

Press lock (1.) and turn switch in anti-
clockwise direction to the required
stage (2.)
MXE 1200:
I Output stage
Spindle lock for changing mixer
paddle
MXE 1002/1202/1602:
I Output stage with higher torque
II Output stage with higher speed
Spindle lock for changing mixer
paddle