L 26
-
6 230
20
Instructions for use
WARNING!
Before carrying out any work on the angle
grinder, always pull out the mains plug.
Before switching on the power tool
Unpack the angle grinder and check that
there are no missing or damaged parts.
Attach the guard
WARNING!
When using the angle grinder for roughing
or cutting, never work without the guard.
A special cutting guard must be used for
cutting.
Pull out the mains plug.
Connect the guard to the clamping flange
with the clamping ring by inserting the
cam on the clamping ring into the groove
on the flange (1.).
Rotate guard hood into the required
position (2.) and tighten clamping
lever (3.).
Remove in reverse order.
Attach the handle
NOTE
It is not permitted to operate the electric
power tool without the handle.
Attaching/changing the tool
Pull out the mains plug.
Attach the grinding wheel
Press and hold down the spindle lock (1.).
Using the face spanner, loosen the
clamping nut on the spindle in an anti-
clockwise direction and remove (2.).
Insert the grinding wheel in the correct
position.
Screw the clamping nut with flange face
up, onto the spindle.
NOTE
The bolt (a) must protrude
approx. 9 mm out of the
thread. Tighten as
necessary.
Summary of Contents for L 26-6 230
Page 1: ...L 26 6 230 ...
Page 285: ...285 ...
Page 296: ...437 867 06 2016 Für Druckfehler keine Gewähr Technische Änderungen vorbehalten ...