Attention!
Observe precautions
electrostatic sensitive device
By default, the PMBus data and clock lines are pulled up internally to 3.3 V. If an
external ones are used, please make sure to pull up to 3.3V only. Operation from
5V is not specified and may permanently damage this USB-PMBus adapter.
This equipment is intended for use in a laboratory test environment only. It
generates, uses, and can radiate radio frequency energy and has not been tested
for compliance with the limits of computing devices pursuant to subpart J of part
15 of FCC rules, which are designed to provide reasonable protection against
radio frequency interference. Operation of this equipment in other environments
may cause interference with radio communications, in which case, the user, at
his/her own expense, will be required to take whatever measures may be required
to correct this interference.
KEP 91017
USB-PMBus Adapter
28701-
KEP 91017
August
2018
©
Flex
User Guide
5
KEP 91017
USB-PMBus Adapter
28701-
KEP 91017
Rev. A
August
2018
©
Flex
User Guide
5