Flex FX2141, Operator'S Manual

Page: 16 / 72

-16-
SAW HOOK (FIG. 9)
Your tool is equipped with a hook. Use the hook
to hang the saw from a rafter or beam or other
similar secure structure for temporary storage
during work. Recommended lumber size to
support the saw with the hook: 2x4.
To use, lift up the hook until it snaps into the
open position.
When not in use, always lower the hook until it
snaps into the closed position.
WARNING
When the saw is hung by
the hook, do not shake the
saw or the object that it is hanging from. Do
not hang the saw from any electrical wires.
Make sure that the structure used to hang
the saw is secure. Personal injury or property
damage may occur.
Only use the hook for hanging the saw.
Using the hook to hang anything else could lead
to serious injury.
Do not use the hook to reach another object
or use the hook to support your weight in
any situation.
Fig. 9
Saw Hook