Flex DWL 2500 Instruction Manual Download Page 12

Instruction manual

DWL 2500 12.0/18.0V

12

Device, accessories and packaging should 

be recycled in an environmentally friendly 

manner. Plastic parts are identified for 

recycling according to material type.

WARNING

Do not throw batteries into the household 

waste, fire or water. Do not open used 

batteries.

Accumulators/batteries should be collected, 

recycled or disposed of in an environ-

mentally friendly manner.

EU countries only:

In accordance with Directive 2006/66/EC 

defective or used batteries must be recycled

NOTE

Please ask your dealer about disposal 

options!

Warranty

FLEX North America limited one 

year warranty

FLEX North America warrants its Profes-

sional Power Tools for a period of one year 

from the date of original purchase. We will 

repair or replace at our option, any part or 

parts of the product and accessories covered 

under this warranty, which, after examination, 

prove(s) to be defective in workmanship or 

material during the warranty period. For repair 

or replacement, return the complete tool or 

accessory, transportation prepaid, to your 

nearest Authorized Service Station. 

Proof of purchase may be required. 

This warranty does not apply to repair or 

replacement due to misuse, abuse, normal 

wear and tear or repairs attempted or made by 

someone other than our Authorized Service 

Stations.

ANY IMPLIED WARRANTY, INCLUDING 

THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR 

PARTICULAR PURPOSE, WILL LAST 

ONLY FOR ONE (1) YEAR FROM THE 

DATE OF PURCHASE.

To obtain information on warranty perfor-

mance, please write to:

FLEX - North America, Inc.

2720 E. Phillips Road

Greer, SC 29650, U.S.A.

1-877-331-6103 (main line)

1-888-331-6104 (fax line)

www.FlexNorthAmerica.com

THE FOREGOING OBLIGATION IS FLEX 

NORTH AMERICA'S SOLE LIABILITY 

UNDER THIS OR ANY IMPLIED WARRAN-

TY AND UNDER NO CIRCUMSTANCES 

SHALL FLEX NORTH AMERICA BE 

LIABLE FOR ANY INCIDENTAL 

CONSEQUENTIAL DAMAGES.

Some states do not allow limitations or how 

long an implied warranty lasts or the 

exclusion or limitation of incidental or 

consequential damages, so the above 

limitation or exclusion may not apply to you.

This warranty gives you specific legal rights 

and you may also have other legal rights, 

which vary from state to state.

493.635_DWL 2500_12.0_18.0.book  Seite 12  Donnerstag, 19. September 2019  1:19 13

FCC WARNING

This device complies with Part 15 of the FCC rules. 

Operation is subject to the following two conditions: 

1) this device may not cause harmful interference, and 

2) this device must accept any interference received, 

including interference that may cause undesired operation.

Caution:

 changes or modifications not expressly approved 

by the party responsible for compliance could void your 

authority to operate the equipment.

Radiation Exposure Statement

The device has been evaluated to meet general RF 

exposure requirement.

The device can be used in portable exposure condition 

without restriction.

Summary of Contents for DWL 2500














Reviews: