Flex BED 18, Manual

Page: 18 / 186

Drilling unit
18
Attaching or changing diamond
drill bit
t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK

Pull out the mains plug.

Grip tool holder with enclosed open-end
wrench 17.

Screw diamond drill bit onto the shank.

Tighten drill bit with second open-end
wrench 19.
Function test:

Insert the mains plug into the socket.

Switch on the electric power tool (without
locking the button) and leave it running
for approx. 30 seconds.
Check for imbalances and vibrations.

Switch off the electric power tool.
Preselecting the speed
To set the operating speed, move the dial
to the required value.
Setting Speed (min
–1
)
1 3300
2 4600
3 6100
4 7300
5 8700
6 10000
Switching on and off
Brief operation without engaged
switch rocker:

Push the switch rocker forwards and hold
in position.

To switch off the power tool, release
the switch rocker.
Continuous operation with engaged
switch rocker:
`^rqflk>
cçääçïáåÖ=~=éçïÉê=Ñ~áäìêÉI=íÜÉ=ëïáíÅÜÉÇJçå=
ã~ÅÜáåÉ=ïáää=ëí~êí=êìååáåÖ=~Ö~áåK

Push the switch rocker forwards and
engage by pressing the front end.

To switch off the power tool, release the
switch rocker by pressing the rear end.