Flex ADM 60-T, Operating Instructions Manual

Page: 15 / 210

FLEX ADM 60–T
15
Technical specifications
–
* The measurement range may be less under
unfavourable conditions (bright sunlight,
reflective surfaces). It is recommended
to use a laser target plate (optional).
Instructions for use
WARNING!
– Do not point the laser beam at people
or animals.
– Do not look into the laser beam.
– Do not put any optical instruments
in the path of the beam.
This measuring instrument generates laser
radiation which may cause blindness.
CAUTION!
– Do not use the measuring instrument
in a damp, dusty or sandy environment.
Device components may be damaged.
– If the device is brought from a very cold
to a warmer environment or vice versa,
you should allow the device to acclimatise
before using it.
– If using adapters and tripods, ensure that
the device is screwed on tightly.
The most important operating steps are
explained at the end of these instructions
on the illustrated pages.
See from page 170.
Laser range finder ADM 60–T
Visible laser diode 635 nm
Laser class 2
Measurement range * 0,1–60 m
Precision * ± 2 mm
Smallest display size 1 mm
Power supply 4 x LR03/AAA
Operating duration
Individual measurements (number) ≤ 5000
Automatic switch-off
– Display illumination
– Laser beam
– Measuring instrument
10 s
20 s
300 s
Temperature range
– for operation
– for storage
0 °C ... 40 °C
–20 °C ... 70 °C
Weight (with batteries) 0,185 kg