OPERATION
19
Working with Banks – Saving Mode
The
Bank Saving
feature permits you to copy the presets into the bank and to organize your sounds for your gigs, your recording
sessions etc.
In the example below we will program the Bank D
with the presets 1,5,2,- (bypass)
1.
Hold On
the footswitch to change the Bank and release it when you reach
(Bank Save). You entered in the Bank
Saving Mode.
Please note that you can abort the operation pressing the MODE/ESC switch button.
2.
(with
flashing) will appear on the display. First thing you should do is to choose the Bank to program.
Single Press
of the footswitch to change the bank selection,
Hold ON
the footswitch to confirm the selection.
In this example we will program the Bank D, so press S1 until you reach
(with
flashing) and
Hold On
the footswitch to
confirm.
3. Next thing you should do is to store the presets in the bank positions.
(
flashing) appears on the display. It stands for Position 1 Bypass.
Single Press
of the footswitch to change the Preset Number ( if you play you can hear the preset sound): - (Bypass), P1..P8
(Preset 1..8), E (sequence END) are the available choices.
4. Select Preset 1 on position 1 (
with
flashing) and
Hold On
the footswitch to confirm it.
5. Now it will appear on the display (
with
flashing), repeat the step 4 to store into the bank the Preset 5, Preset 2 and
Bypass.
6. On the display it will appear now
(with
–
flashings), you have to terminate the sequence.
Single Press
of the footswitch
until you reach
, E stands for End & Exit, Hold On the footswitch to confirm the sequence end.
7. The pedal automatically exits from Bank Saving Mode and enters in Bank Play Mode, so Bank A with first stored preset will
appear on the display.
Summary of Contents for FW-DLC
Page 27: ...WWW FLEXWAVES COM 27 ...
