1 . 0 - H a r d w a r e S p e c i f i c a t i o n s
P O W E R R E Q U I R E M E N T S
A N A L O G I N P U T S
L O A D S W I T C H E S
P H Y S I C A L
Dimensions: 157 mm x 108 mm x 40 mm (Mounting Holes: 96 mm x 144 mm - 4 x 3mm)
Also mount with standard DIN Rail - Recommended DIN Rail space: 120 mm
Temperature Rating: –40 to 85°C (industrial rated components)
Environment: Max 95% relative humidity, non-condensing ( ETSI300-019-1.4 Standard )
Weight: 200g
Voltage: 9 - 60 VDC (reverse polarity protected)
Power Consumption: 0.6 W @ 12V Typical (varies based on configuration)
R E G U L A T E D O U T P U T S
Analog Conversion: 24 bit; 0.05 mV @ ±60 V range; 0.004 mV precision @ ±5 V range
Voltage Range: ±60 V (fully differential, bi-polar) (0.5 M
Ω
. Imp)
Current Range: 0 - 25 mA (requires hardware jumper change)
Max Voltage: 60 VDC
Max Current: 8 A Max Cont (100 A Surge <1 ms) (50% derating above 50° C)
Switch Type: Isolated solid state N-Channel FET /w fly-back protection
Fusing: ATO blade style fuse (replace only with fuses rated for correct voltage range)
Software Fuse: 500 mA to 5 A ***PRO ONLY***
Current Sensing: 0 to 5 A ***PRO ONLY***
LTE SPECS ***LTE VERSION ONLY***
5.0 V output: 500 mA Max
3.3 V output: 500 mA Max (Typ 3.47V)
3.3 V Output /w LTE Module: 150 mA Max (Typ 3.47V)
E T H E R N E T
10/100 Mbps Operation
Long-Range 300 Meter at 10 Mbps
IEEE 802.3az Energy Efficient Ethernet
±15 kV IEC 61000-4-2 Level 4 ESD Protection
IEEE 802.3 Auto-Negotiation
IPv4: DHCP, Static; IPv6: SLAAC, DHCPv6, Static
Passive PoE: Pins 4, 5+; 7, 8- @ 9 to 56V
LTE CAT–M1/NB–IoT 3GPP release 13 LTE Adv. Pro
SMA Connector: SMA-Female
LTE Bands: 2, 3, 4, 5, 8, 12, 13, 20, 28
Modem: ublox SARA-R410M-02B
Certified by: FCC, ISED, PTCRB, NCC, RCM, RED,
AT&T, Telus, Telstra, Verizon, GITEKI 2
