Step 5: Mount the fan assembly to the radiator
Look for at least four potential mounting points that
are able to support the weight of the fan to attach the
fan to the vehicle. Cross braces, radiator trays, front
facia, and radiator mounting points are all possible
mounting points. Use the universal brackets and
hardware kit supplied to hold the fan against the
radiator core. On some applications, the brackets
may need to be cut or modified to fit. Additional
holes may need to be drilled as well.
Put the fan into place. Before tightening the brack-
ets, adjust the fan so that the rubber seal is contact-
ing the radiator core and compress the seal about
50%. It may help to have a friend hold the fan
against the core while tightening brackets.
Step 6: Wire the control module
(Does not apply to #188)
Wiring Diagram
6a. Connect the motor wires to the control module
(Red wire to the "M+" terminal and black wire to the "M-" terminal).
6b. Disconnect the negative battery lead for
safety while finishing the wiring. Use the large
diameter red (10 AWG) wire to run power directly
from the battery positive (+) terminal to the "B"
terminal on the control module. Connect the fuse
holder in-line with this wire, as shown, but do not
insert the fuse yet. Use the yellow female, ring,
and butt connectors provided.
C
ONTINUE
TO
NEXT
PAGE
TO
COMPLETE
THE
INSTALLATION
.
The brackets can be cut to length if necessary.
Compress seal against core and tighten in place.
Page 3 of 4
#29003
Colored
