4.Status lights are areas
If the current partition the range of ten branch have all been opened, the status lamp is
automatically lit area, or out automatically. When the very area the state is lit, press the key
areas that are currently ten branch off, or that the ten minutes to open the current Area.
5.State region
If all the partitions have all been opened, the region's status light will turn on
automatically, or automatically switch off
6. the operation note
Remote paging microphone comes with an internal microprocessor, the switch-up time
must be spaced at least 10 seconds;
Remote paging microphone connected to equipment changes, please restart the computer,
or may not work;
Remote paging microphone with the PAGING SELECTOR connector systems. The number
of allowed two or more devices simultaneously access the same address.
At the same time, allowing only a remote call station at the same time PAGING SELECTOR
to make a call.
PAGING SELECTOR receives the current call FLP-PMC010 non-closure of the region data,
the data is not clear;
PAGING SELECTOR when the manual paging, paging will clear all the remote data;
PAGING SELECTOR short-circuit alarm, will clear all the remote paging, paging data
manually;
PAGING SELECTOR in manual paging or short-circuit alarm, remote paging microphone
FLP-PMC010 can not make any calls.
The seventh Note connections
UTP cable must be shielded twisted pair with a double, RJ45 connector joints must be
shielded
Cable shield must be two nine-pin D-shaped metal shell interface connection, making RJ45
connector, RJ45 shield must be Connector shield connection, otherwise you may burn
equipment
Remote paging microphone connector end of the first row of the last two pins short-circuit
must be connected, or may not function properly Paging control.
OPERATION
3.Partition status lights.
1.MIC status lights
Light: that the microphone is turned on
off: that the microphone is turned off
2.CHIME status lights
Light: that bell music is sent
Off: that the microphone is turned on
Bell lights can be manually opened, automatically shut down after the bell can not be
Manually closed.
Off: that this partition has been closed
Light: that this partition has been opened
Slow (0.5 seconds) flashes: waiting to be paging device, said response, slow flash to stop
That did not receive responses
Fast (interval 0.1 seconds) flash: that is paging device is in busy state, such as: the other
is paging equipment, radio or are in the local paging radio, or are in the alarm state. The end
of the state will know all the flash lights.
The fifth, the status light
8
