5
. W I R I N G I N T R O D U C T I O N
DC power cable
Will meet the requirements of the nominal power is connected to the "Power Interface"
terminal, pay attention to the polarity; kind of connection wires, use 4-10AWG models.
Input connector is active power balance, pins 1 grounding (block), pin 2 cold (anode, -)
Pins 3 hot (positive, +)
Note: it is recommended to use symmetry (balance) shielded cable, because the
balance of signal noise and radio interference of AC power source is not so sensitive.
And unbalanced lines can cause noise, especially when long cable through.
2
Connected directly with the constant voltage speaker; Speaker output line should be 1 mm
RVS pair twisted copper wire. The diameter should be increased when the distance is longer.
The output line
4 channel maximum support power 2000W, input current is 2000W/24V = 83.83A,
choose 4AWG wire.
Input line connection
8
Summary of Contents for FLP-PA4500D
Page 17: ...Version0 1 TM TM...
