56
ARPEX 8706 en
Operating instructions 10/2017
9.
Faults, causes and remedy
Observe the instructions in section 3, "Safety instructions"!
9.1
General
The following irregularities can serve as a guide for fault tracing.
Where the system is a complex one, all component units must be included when tracing faults.
The coupling must run with little noise and vibration in all operating phases. Irregular behaviour must be
treated as a fault requiring immediate remedy.
WARNING
Risk of serious injury through flying fragments
Risk of serious injury through flying fragments and/or risk of damage to the coupling.
– Any changes on the part of the user are not permitted. This applies equally to safety features designed
to prevent accidental contact.
– The coupling is designed only for the application specified in the order. Other operating conditions are
regarded as incorrect and must be contractually agreed. For any damage resulting therefrom only the
user or operator of the machine or plant is responsible.
WARNING
Risk of serious injury through flying fragments
Risk of serious injury through flying fragments and/or risk of damage to the coupling through use of
defective spare parts.
Flender guarantees only the genuine spare parts supplied by Flender.
Nongenuine spare parts have not been tested or approved by Flender. Nongenuine spare parts may
alter technical characteristics of the coupling, thereby posing an active or passive risk to safety.
Flender will assume no liability or guarantee for damage caused by spare parts not supplied by Flender.
The same applies to any accessories not supplied by Flender.
