Fleetwood 2013 Jamboree, Owner'S Manual

Page: 50 / 98

Living With Your Motor Home
06-9
To check tank levels:
Press PROPANE, FRESH WATER, GREY
or BLACK TANK switches.
The E or empty indicator light will always
be lit when the rocker or touch switches are
depressed. If the tank is full, all lights will
be on. Lights are sequential, and indicate
levels in approximately 1/3 or 1/4-tank
increments depending on monitor or panel
design. If the tank selected is approximate-
ly 1/2-full, for example, lights E, 1/4 and
1/2 will be on.
Erroneous tank level indications can be
caused by:
a. Water with low mineral content. The level
is measured by a very low level electrical
signal traveling through the liquid. Some
water may not conduct the signal properly.
This condition may be infrequent, but can
exist. Check the panel reading when the
fresh water tank is filled.
b. Material trapped on the holding tank
probes may give a full reading when the
tank is actually empty.