4. Run up to 4 zipties on the bottom of the
modems’ cradle. Snap the modem into the
cradle and secure it with a ziptie across the
top and around the cradle.
5. Connect the power harness to the modem.
6. Turn on the ignition. On the modem, switch
the back-up battery power switch to ON (I).
7. Mount the device in a location with least
amount of exposure to damage by people
or objects. Possible mounting locations are
under the central console, behind the dash
or behind the glove compartment.
8. Validate that the unit is setup in the Fleet
Complete Application by logining into your
account. Your account login is sent to the
main contact listed on the account at the
time of purchase.
9. Update the asset in Fleet Complete with corresponding Device
IMEI Number, Vehicle ID, VIN and Odometer reading.
There are two acceptable methods of making a wire connection:
• Solder the 12v Constant Power and Ground cables to the vehicles
power center.
• Splice and weave wires to 12v Constant Power and Ground cables.
Important
:
Hardware warranty will be voided if the device is
not installed according to the instructions.
For technical support call 1 800 220 0779 |