A ADJUSTING ALTERNATING INGREDIENT TIMING
B
5
Press the Cancel Entry key to set the adjustment and
exit the mode.
Draw a serving to determine if the adjustment is
satisfactory. Repeat this process until the correct
ingredient concentration is achieved.
6
To increase the timing (for wider layers), press the
LARGE CUP (+) key until the correct number of bar
graph lights are lit.
3
To decrease the timing (for more narrow layers), press
the SMALL CUP (-) key until the correct number of bar
graph lights are lit.
4
Press and hold the #1 and #2 keys simultaneously until
the keypad lights flash.
1
The number of lighted bars in the graph represent the
length of time each layer is dispensed. Use the
following chart to determine the bar graph setting
needed for the desired dispense time for each
ingredient layer.
2
CW 194 KEYPAD OVERLAY - AUTO- continued
REV031008
pg. 2 of 3
NOTE:
IF THIS IS THE FIRST TIME
ALTERNATING INGREDIENT TIMING HAS BEEN
SET, SET THE TIMING TO ONE LIGHT (.5 SECONDS),
DRAW A SERVING, AND THEN ADJUST THE TIMING FOR
WIDER LAYERS IF NEEDED.
ALT. INGREDIENT TIMING
1 Light =
.5 seconds
2 Lights =
.6 seconds
3 Lights =
.7 seconds
4 Lights =
.8 seconds
5 Lights =
1.0 seconds
6 Lights =
1.2 seconds
7 Lights =
1.4 seconds
8 Lights =
1.6 seconds
9 Lights =
1.8 seconds
10 Lights
= 2.0
seconds
