ENG
9
T R O U B L E S H O O T I N G
Cash box will not come out
Coins inserted but not reg-
istered
Drinks taste different to
usual
No messages on display
“CALL OPERATOR” mes-
sage flashes
The cash box may have over-
flowed
Cash box may have over-
flowed
Brewer may need to be
drained.
Brewer has been switched off
at back.
Brewer disconnected at sock-
et
Open brewer door and check
the following messages on
the operator display
•
“PACK DOOR TIMEOUT”
•
“PACK INJECT TIMEOUT”
•
“PACK EJECT TIMEOUT”
•
“WATER OVERFLOW”
Try pressing the coin reject button
and gently shaking the cash box.
DO NOT TRY TO FORCE IT OUT.
If you cannot remove the cash box,
please call your Customer Service
Office
Try pressing the coin reject button
and gently shaking the cash box.
DO NOT TRY TO FORCE IT OUT.
If you cannot remove the cash box,
please call your Customer Service
Office
See “DRAINING YOUR BREWER”
Switch it back on
Put plug back into socket and switch
it on socket
Just close brewer door again to
reset.
If problem recurs, please call your
Customer Service Officer.
Opening and closing brewer door
should clear problem.
If problem is still not cleared, please
call your Customer Service Office.
Switch off your brewer and, if your
brewer is mains water fill, turn off the
water supply to the brewer. Please
call your Customer Service Office
Otherwise, please switch off the
brewer and call your Customer
Service Office, remembering to tell
them what message your brewer is
displaying
PROBLEM
REASON
SOLUTION
10
SAFETY AND INSTALLATION GUIDELINES
We at Four Square are committed to safety in all aspects of our product design, manufacture,
installation and service.
SYSTEM APPROVALS
IMPORTANT NOTES
ELECTRICAL CONNECTION
WARNINGS AND GUIDANCE
This system has been designed and manufactured in accordance with European legislation relating to
Safety and Electromagnetic Compatibility (EMC)
These warnings are provided in the interests of safety. Please read them carefully and ensure anyone who is
involved with routine cleaning and loading also reads them.
•
This system is for indoor use only. Never place outside
•
It is dangerous to change the specification or modify the systems in any way
•
Ensure access to the rear of the system can be achieved easily to allow isolation of the electrical and
water supply
•
Under no circumstances should you attempt to perform any servicing or repairs on this system.
Inexperienced persons may cause injury or malfunction. Always call your Customer Service Office or
Service Agent.
•
Do not immerse system in water
•
Only clean in specified areas as instructed
•
Supervision is required if the system is to be used by young children, aged or infirm persons
•
This system contains electronic circuits.
Do not flash test.
•
Observe recommendations relating to regular inspection and testing of this system under the “U.K.
Electricity At Work” section
•
An ambient temperature range of +5°C to +30°C is recommended for system location
•
The system is flash tested before it leaves the manufacturing premises. Repeated flash testing
can damage insulation.
•
This system contains electronic components. Other tests that are available on portable
appliance testers are
Load Test, Earth Leakage Test,
and
Output Test.
These tests are not
required.
•
DO NOT FLASH TEST THIS
•
If the plug is damaged it should be removed from the voltage supply, cut off and disposed of carefully.
NEVER ATTEMPT TO RE-USE.
•
If the mains cord or plug is damaged never attempt to replace; contact your customer service office or
service agent. Replacement requires the use of special purpose tools.
•
Never attempt to plug in a cut-off plug into a mains socket. Such action may present a shock hazard.
•
The wires in the mains lead are colour coded in accordance with the following code:
Green/Yellow = Earth Blue = Neutral Brown = Live
•
If you fit your own plug, the colours of the wires in the mains lead of your system may not correspond
with the markings identifying the terminals in your plug. Proceed as follows:
•
13 ampere U.K. plug types :
Connect green/yellow (earth) wire to the terminal marked E, the Earth symbol, coloured green or coloured
green/yellow
•
Connect blue (neutral) wire to the terminal in the plug, which is marked with the letter N or coloured black.
•
Connect the brown (live) wire to the terminal in the plug, which is marked with the letter L or coloured red.
•
Other Plug types:
Connect the green/ yellow (earth) wire to the terminal in the plug which is marked with
the letter E or the earth symbol or coloured green or green/yellow.
Notice
OPS Guide New.qxd 6/12/01 6:00 pm Page 12