FLAVIA Creation 150 MC User Manual Download Page 9

7

GETTING THE MOST FROM YOUR BREWER

  PURE WATER FOR THE FINEST TASTING BEVERAGES EVERY TIME

For a great-tasting hot beverage in every cup, replace the FLAVIA® filter every six months. 

FLAVIA® filter cartridges will help protect your FLAVIA® CREATION

TM

 Brewer and extend its life. 

The organic ion exchangers and activated charcoal within the filter reduce heavy metals and other 

contaminants, as well as substances such as chlorine, which could impair the flavor and aroma 

of your hot beverage. The filter goes straight in the reservoir and does not require any additional 

accessories to install. It also does not take up take up any extra worktop space.

Please refer to ‘WATER FILTER REPLACEMENT’ section of this guide for information on how to 

replace or obtain a new Water Filter.

If unopened, your packs will remain fresh and continue to make excellent drinks right up to 

the 

best before date shown on the back of the pack.

•  Packs should be stored in a cool dry place.

•  Packs should not be stored in a refrigerator or freezer.

  SELECTING YOUR CUP

To avoid spillage or burns, please ensure that you always use the correct size cup or mug. 

This 

should give a minimal distance from the rim of the cup to the underside of the filter-pack when 

inserted. To minimise vending mess please avoid rounded bottom cups. 

  PACKS

  BREW HEAD ADJUSTMENT AND TRAVEL MUG FACILITY

You can easily adapt your Brewer to 

accommodate your favourite mug or 

cup by simply adjusting the height of 

the Brew Head. The Drip Tray can also 

be removed to accommodate your 

travel mug.

Note:

    

Position the Brew Head close to the top of your cup or mug to minimize the splash 

from the Brewer.

CAUTION:

   Please be aware that the minimum cup size for use your 

Brewer to avoid overflow is 11floz (325ml).

1.

  The use of FLAVIA® paper cups is recommended. Alternative cups may

 

be used providing they are of similar proportions to ref. H and weigh a 

 

minimum of 5g. 

2.

  Use of cups that do not meet the recommended criteria 

 

may result in overflow or mess creation.

3.

  For further advice on cups and mugs suitable for use with your 

 

Brewer please contact customer service or your local FLAVIA® supplier.

(Ref. H)

3.3” (83mm)

2.2” (56mm)

4.

1”(104mm)

Minimum

weight 5g

Summary of Contents for Creation 150 MC



































Reviews: