4.5.3
Disconnect the solenoid plug from the harness.
4.5.4
Unscrew the solenoid pipe from the retaining brackets.
4.5.5
Remove solenoid from pipe and refit new solenoid.
PARTS SHORTLIST / WIRING DIAGRAM (FIG. 35)
Replacement of any other parts must be carried out by a competent person such
as a GAS SAFE registered gas installer. The part numbers of the main
replaceable parts are as follows, these are available from your local stockist,
whose details may be found on the BFM Europe website, address as shown
on the rear cover.
Fuelbed base (coal models)
B-56320
Fuelbed base (pebble models)
B-77260
Fuelbed front rail (pebble models)
B-58140
Replacement pebble set
B-77250
Fuelbed front ceramics rails (coal models)
B-56330
Replacement coal set & ceramics
B-56960
Piezo Igniter
B-1320
Ignition Wire
B-39030
Manual Gas Valve (NG)
B-102880
Pressure Switch
CV-103507
Solenoid Valve
CV-104303
Fan Motor
CV-103330
Fan Proving Unit
CV-103505
2.5 metre standard wiring loom
CV-H47
6.0 meter wiring loom (for use with additional flue duct)
CV-H79
830mm flue length (for use with additional flue duct)
CV-3350
100mm x 100mm duct connector (for use with additional flue duct)
CV-3351
100mm x 100mm 45 degree bend (for use with additional flue duct)
CV-3359
100mm x 100mm 90 degree bend (for use with additional flue duct)
CV-3357
Fig. 35
Important Note : Should the electric mains supply cable require replacing,
this must only be carried out by a BFM service agent or other suitably
qualified person.
33
