Unfold both back wheels until they click into place.
1
Unfold front wheel until it reaches 45°.
2
Unfold front wheel with lower frame.
3
Bring handle in position and adjust if necessary.
Lower handle: Turn hook anti-clockwise.
Higher handle: Turn hook clockwise.
4
Insert Battery and plug in (red to red, black
to black). Battery should be fully charged be-
fore starting game (charger LED turns green).
Maximum charge time is 6 hours.
5
Front Wheel - Directional Stability
Turn screw clockwise: Trolley pulls
more to the left.
Turn screw anti-clockwise: Trolley pulls
more to the right.
youtu.be/WRCMTJs5yeM
EN
18 meters: press distance button (1x) (LED flashes slowly).
36 meters: press distance button for 1 sec. (LED flashes fast).
Emergency brake: press standby button.
The Park Assistant turns on as soon as the programmed distance is reached.
Distance Assistant
Adjust speed of Trolley incl. Stop-and-Go Function: Adjust your requested speed
once. To stop Trolley press standby button. To start press standby button again. The
Trolley will move on in before adjusted speed limit.
Controller
The Park Assistant can activated when the trolley is not being moved.
To activate the Park Assistant click on the park button.
To release the Park Assistant click on the park button or use the standby button to
carry on with the prior speed.
Park Assistant
Power on: press standby button for about 3 sec. (LED flashes).
Moving: press standby button (1x).
Stopping: press standby button again (1x).
Power off: press standby button for 3 sec. (LED off).
When Trolley is stopped or turned off, the Trolley is in automatic free-wheel mode.
Standby Button
Cleaning
Do not use high-pressure cleaner to clean Trolley and do not drive into water higher than the lower
edge of the wheel hubs. We advise to clean Trolley with a damp cloth and if necessary with a mild
cleaner.
Frame & wheels
Do not put any heavy items on Trolley, especially not on wheels during transport (i.e. in the car).
Electronics
Never pull Trolley behind while driving in a golf car. Not only for safety reasons but also for protec-
tion of the electric system (may cause over-voltage and total damage).
In case of overload the electronic automatically switches to reduced power. An overload occurs when
the trolley has to pull high weight.
