6
Operations
1. Remove the lamp cover. Install the modeling
lamp and attach a standard reflector.
To detach the standard
reflector, press the release button on the flash head
and turn the standard reflector
counterclockwise.
2. Attach the flash unit onto an
appropriate light stand. Adjust the mounting
bracket (16) and make sure it is tightened.
Use the (18) to adjust the flash to a desired
direction. Umbrella shaft channel (17) Head
tilt lock accommodates most umbrella diameters.
Power Connection
Firmly insert the power cord and connect the flash to an AC power source. Turn on the power
switch (3).
Modeling Lamp
Short press the Modeling Lamp Button (5) to choose the modeling lamp’s mode (OFF/ON,
PROP and Percentage); and long press the Modeling Lamp Button (5) to set the lamp to INTER-
MITENT Mode, linking the modeling lamp to indicate the completion of recycle of the flash.
Modeling lamp will be turned off automatically after 4 hours, as a safety measure.
When there is flammable accessory mounted on the flash unit, do not keep
the modeling lamp on for an extended time, as there is no internal fan.
Without ventilation within the accessory, a cool down period is recom-
mended.
17
18