inStALLAtiOn MODe SeLeCtiOn
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
MODULe PrOgrAMMing PrOCeDUre - PtS witHOUt KeyPOrt
4
Wait, LED will turn solid GREEN
for 2 seconds.
3
Push start button twice [2x] with
the keyfob 1 to ON position.
x2
PANIC
PANIC
PANIC
ENGINE
START
STOP
ENGINE
START
STOP
1
Remove valet key from keyfob 1.
PANIC
PANIC
PANIC
ENGINE
START
STOP
ENGINE
START
STOP
7
Press UNLOCK on keyfob.
PANIC
PANIC
PANIC
ENGINE
START
STOP
ENGINE
START
STOP
2
Remove battery from keyfob 1.
PANIC
PANIC
PANIC
ENGINE
START
STOP
ENGINE
START
STOP
6
Insert battery in keyfob 1.
PANIC
PANIC
PANIC
ENGINE
START
STOP
ENGINE
START
STOP
5
Push start button once [1x] to
OFF position.
x1
PANIC
PANIC
PANIC
ENGINE
START
STOP
ENGINE
START
STOP
8
Module Programming
Procedure completed.
!
If the vehicle is equipped with a power liftgate: Open and
close the power liftgate with the OEM keyfob.
Page 16 of 17
FLC-AL(DL)-HA4-EN
20140120
iNstall Guide
www.flash-it.com
audiovox electronics corp. © 2013
ALL IN ONE
Honda/acura
Doc. No.: ##13626##
