U.S. Patent No. 8,856,780
XX-XX
PAGE X-X
ADS-AL(DL)-CH4 2-2
PAGE X-X
inStaLLatiOn mOde SeLeCtiOn
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
mOdULe PrOgramming PrOCedUre - PUSH tO Start
1
Close driver door.
Re-open driver door to wake up
data bus.
4
Within 5 seconds, LED will fl ash
GREEN rapidly.
3
LED will turn solid RED.
8
Module Programming
Procedure completed.
6
Press UNLOCK on the OEM
remote.
UNLOCK
7
Wait, LED will turn solid GREEN
for 2 seconds.
2
DO NOT PRESS BRAKE PEDAL
Push start button twice [2x] to
ON position.
x2
Æ
5
DO NOT PRESS BRAKE PEDAL
Push start button once [1x] to
OFF position.
x1
Æ
Page 9 of 11
FLC-AL(DL)-CH4-EN
20151028
inStall GUide
www.flaShloGic.com
automotive data Solutions inc. © 2015
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##23962##
