Flashforge 6937120300397, User Manual

Page: 16 / 32

Q：
A：
Q：
A：
Q：
A： Is it very power-consuming to keep the filament drying station on for a long time?
The power consumption will be high only in the drying mode, while there is almost
no power consumption in the storage mode.
What happens when the desiccant is in the regenerative cycle mode?
At this time, the equipment is dehumidifying the desiccant to achieve the purpose of
reuse. At this time, the humidity data may rise.
Is there a door sensor function?
There is a door sensor function. If the door open detection function is turned on, the
drying and automatic storage (drying) functions will be enabled only when the door
is closed tightly. It is also feasible to turn off the door detection function and then
there will be no further detection of whether the door is closed or not.
Q：
A： How does the door detection sensor affect the functions of the equipment?
If the door detection is not triggered (the door is not closed properly), the equipment
will not give any prompt, and will not carry out the storage mode or the drying mode.
It is necessary to ensure whether the door is closed properly.
When the door detection function is turned off in the settings, the drying and storage
functions will be enabled whether the door is closed properly or not.
Q：
A： How long is the estimated time for the indoor humidity to drop from 50% to 10%?
It will take about half an hour to reduce the indoor humidity from 50% to 10%.
Q：
A： What is the power consumption of the filament drying station drying for 12 hours?
When at room temperature, the target drying temperature is set at 120℃, the power
consumption is about 1.4KWh.
14