04
8.Remove the bubble wrap from extruder and
slide the x-axis rod to the middle of the printer.
10.Elevate the build plate to its limit.
Notes: Do not let build plate touch extruder.
11.Remove both filament rolls and foam pieces
from printer. Note: Take both spool holders
out of the foam.
9.Place the dual extruder on the extruder seat
as show.
7.Remove the foam from the back of the logo
board.
12.Lower the build plate fully. Congratulations!
You've unpacked your printer.
(Tip: Save packaging for future transportation
and storage)