2
Flash-Butrym Sp.j.
Maintenance
1. Please keep the light In dryness and avoiding use In wet place.
2. Using intermittently can be extended the life.
3. Attention to clean the fan and lens usually in order to get the ventilating
effects and lighting effects better.
4. Please do not wipe the crust using organic menstruum for avoid to
damaged the product.
Statement
The product has well capability and intact packing when leave factory. All of
the user should comply with above warning item and manual, any misuse
cause of the damages are not included in our guarantee, and also can’t be
responsible for any malfunction & problem owing to ignore the manual.
Please forgive that we will not be notice for technical change.
Attention Item
1. For guarantee the life of product, please don’t put it on the wet place
and also not use it in the place over 40 degree.
2. Please don’t lay the product on the unfixable or shakable place.
3. Ask for the professional to maintain the product in order to avoid the
danger of get an electric shock.
4. Power supply should not be changed over +/- 10% while the light is
using, it will be decreased the life of lamp if the power is too high, but it
will be influenced the luminosity if the power is too low.
5. After power off, if it is need used again, please cool down over 20
minutes.
6. Please look round the manual for ensure the product can be used
normally.
Product introduction
•
Power supply: AC230V, 50Hz
•
Power consumption: 50W
•
Fiting lamp: LED 15W RGB
•
DMX-control-channels: 5 or 13, select from control board
